ID: 2610
Open
.PNG)
.PNG)
.PNG)
Description
DOBLADORA DE METAL 4' X 1/4'' PARTE: 2GM-HBR-0425
4 foot plate rolls are made for bending and rolling 1/4" metal sheets or plates into cones and other cylindrical shapes. All three rolls are hydraulic driven, hardened, and made of high grade alloy steel. Equipped with a cone attachment, LED digital readout, operation pedal controls safety line, and a quiet hydraulic system.
- ISO 9001 certified
- Taiwan Machines
- All three rollers are driven
- All three rollers are hardened, up to 50-52 HRC
- Easy swing –out top roller
- Standard cone attachment installed
- 1 each LED indicator for bending roll position
- Safety line all around the machine for emergency stop
- Heavy Duty all steel welded machine construction
- German Hydraulic logic system centrally located and quiet
- Bending roll is hydraulic powered up/down & tilting adjustment
- Planetary reduction gear and pump
- All three rolls are made of high grade alloy steel
- All rolls run forward and reverse
- Safety type foot pedal control
- Overload protection and disconnect switch
- Power source 208V/220V, (Option 460 V , 3 phase)
- LED indicator for bending roll position
- Safety line all around the machine for emergency stop
- Removable safety foot pedal and tool box
- Cone attachment (to make cone parts)
- (3) grooves 3/8”, ½”, 5/8” on roll for bending wire
Roll Capacity: Mild Steel Stainless Steel soft aluminum min. thickness
|
4' x 1/4" 4' x 3/16" 4' x 3/8" 22Ga
|
| Min. Roll dia. | 8" |
| Rolls Length | 4' 3" |
| Rolls Dia. | 6" |
| Pre-bend | 0.18" |
| Rolls speed | 5 RPM |
| Rolls Opening | 2 1/2" |
| Oil Tank Cap. | 12 Gal. |
| Main Motor | 3 HP, 220V/ 10A or 440V/5A |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTE
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTEControl Unit TPA (İtalian)• Spindle: HITECO HSK F63 11KW ATC• Vacuum Pump: BECKER 250M3• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)• Remote Control: YES• Automatic Self Lubrication System: YES ( ILC - Italian )• Under Bridge with 14 tool capacity magazine• 14 Pieces Toolholder• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136• Boring Unit FAM 9 Vertical ( Italian ) Optional• Automatic Unloading and Cleaning Sy...
-500x500.png)
AMXmachinery1
PARTE: 2GM-EPS-0810M - GUILLOTINA MECANICA - 8 PIES LARGO X 10 GA
PARTE: 2GM-EPS-0810M - GUILLOTINA
MECANICA - 8 PIES LARGO X 10 GAShop our 8 foot mechanical shears that are capable of cutting up to 10 gauge mild steel and 14 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop. ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm wit...
AMXmachinery1
CEPILLO 2 CARAS - CON TRANSMISION
PARTE: 2CK-GT610HIIs capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out. The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The spring loaded feed system passes the material over the bottom head allowing it to act like a jointer to flatten the board prior and then a sectional infeed roller fe...