Identificador: 2602
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
DOBLADORA DE METAL 4' X 1/4'' PARTE: 2GM-0425E
Capacity: Mild Steel Stainless Steel soft aluminum min. thickness |
4'3" x 1/4" 4’3” x 3/16" 4’3” x 1/2" 26Ga. |
| |
| Roll Dia. | 6 1/4" |
| Min. Bending Dia. Inch | 8 1/4" |
| Pre-bend inch | 0.25" |
| Rolls Speed ft/min | 20 |
| Rolls Opening | 1/2" |
| Main Motor | 4HP 3PH 220V or 440V |
| Weight | 3,850 lbs. |
| Overal Dimensions | 78" x 33" x 52" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2GM-HS-1214M - GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
PARTE: 2GM-HS-1214M - GUILLOTINA
MECANICA - 12 PIES LARGO X 14 GA ISO 9001 certifiedTaiwan machinesQuick Change Blade Gap AdjustmentCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic logic system centrally located and quietHydraulic hold-downs with anti-mar neopren...
-500x500.png)
AMXmachinery1
TORNO 14'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-1440BGF-3ISO 9001 certifiedLifetime Tech Support by phone and videoFull Geared-head precision Metal Lathe with foot brakeQuick-change gearbox with fast and easy threading set up3 HP heavy duty main motor runs on 220V Single-Phase power1.5” Spindle boreSpindle Nose D1-4 CamlockHeavy Duty guideway; 7.5” width8 spindle speeds ranging from 70-2,000 RPM56 kinds of imperial threads44 kinds of metric threadsSpindle is balanced, ...
-500x500.png)
AMXmachinery1
CEPILLO 2 CARAS 30" X 8"
CEPILLO 2 CARAS 30" X 8" 2CK-GT760ARDThe Cantek GT760ARD 30″ Double Surface Planer has a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed ass...
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE HORIZONTAL
TALADRO MULTIPLE HORIZONTAL 2CK-BM301With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience...