Identificador: 2578
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810M
- ISO 9001 certified
- American design and Taiwan quality machine
- HD all steel construction for maximum rigidity
- Precision driven gearbox
- Full length 30 strokes per minute
- 60” long squaring arm with inch / mm scale
- spring hold-downs
- high grade carbon/chrome alloy steel blades and hardened to 62 hrc,
2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- 6” manual back gauge with one side handwheel
- 60” long squaring arm with inch / mm scale, mounted on right side of the table
- 2 each 24” front support arms
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower blades
Cutting Capacity Mild Steel - HRS (tensile 60,000 PSI) Stainless Steel (tensile 85,000 PSI) Soft Aluminum (tensile 28,000 PSI) min. thickness |
8' x 10Ga. 8' x 14Ga. 8' x 1/4" 22Ga. |
| Blade Lenght | 98" |
| Strokes per minute | 26 |
| Worktable height | 32" |
| Front support arm | 36" |
Back gauge | 26" Manual Back gauge |
Blade Rake Angle | 2.5 Degree |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P508HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga PARTE: 2GM-HS-0808MISO 9001 certifiedTaiwan machinesHS-0808M with 24” manual back gaugeQuick Change Blade Gap Adjustment (BGA), with gap dialCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic lo...
AMXmachinery1
TROMPO AUTOMATICO - CON SISTEMA DE ALIMENTACION
PARTE: 2CK-DT-1128A
Range of cutter diameter
1” to 6” (changeable)
Table diameter
18”
Table speed
1.5 ~ 4.0 RPM (4 speeds)
Spindle diameter
30 mm
Spindle speed
9000 RPM
Cutter size
100 mm
Spindle height
4”
Follower roller diameter
100 mm x 1
Table drive moto...