Identificador: 2607
Abierta
.PNG)
.PNG)
.PNG)
Descripción
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-0610MD
6 foot hydraulic metal shears can cut up to 10 gauge by 72” wide mild steel sheet metal. A hardened shearing blade is installed and pre-gapped ready for buyers to operate upon arrival. Our light duty hydraulic shears are dependable and deliver sharp razor cuts with ease.
- Taiwan machines
- ISO 9001 certified
- HD all steel construction for maximum rigidity
- German logic quiet Rexroth hydraulic system
- Adjustable stroke from 16-20 strokes per minute
- 60” long squaring arm with inch / mm scale
- Spring hold-downs
- High grade carbon/chrome alloy steel blades and hardened to 62 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- 26” manual back gauge with inch/metric dual scale & one side operated hand wheel
- 60” long squaring arm with inch / mm scale
- 2 each 24” front support arms
- 2 each 14” Side gauges with inlaid inch/metric dual scale
- Spring independent hold-downs
- Full length finger guard
- Removable safety foot pedal control
- One set of blades
Cutting Capacity: Mild Steel Stainless Steel Soft aluminum Minimum Capacity |
6' x 10Ga. 6' x 14Ga. 6' x 1/4" Ga. 24 Ga. |
| Blade Length | 6' 6" |
| Strokes per minute adjustable | 16-20 |
| Throat depth | 16" |
| Worktable height | 30 1/2" |
| Front support arm | 24" |
| Back gauge | 26" |
| Blade Rake Angle | 1.5 Degree |
| Oil Tank Capacity | 21 Gal |
| Main Motor | 5 1/2 HP Prewired: 220/3-Phase Optional: 440V 3-Phase |
| Machine Weight | 4,150 lbs. |
| Machine Dimensions | 98" x 35" x 52" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TRANSPORTADOR DE MATERIAL - MOTORIZADO AW
PARTE: 2CK-AW - TRANSPORTADOR DE MATERIAL - MOTORIZADO
Belt Width
BW
12″
15.75″
19.7″
23.6″
27.5″
31.4″
Machine Width
FW
13.4″
17.3″
21.25″
25.2″
29″
33″
Std. Material
Width (max.)
PW
9″
13″
17″
21″
24...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX340M Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the i...
-500x500.jpg)
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...
AMXmachinery1
ESTACION DE CORTE Y BARRENADO
ESTACION DE CORTE Y BARRENADO• Precise cutting to length• Drilling 2 sides: (left and right side)• Doweling (left and right side)• Drilling from the top and underneath• Dividing and grooving• Cleaning and return transport to the operatorThis line is well suited for processing of plinths,drawers and similar items, that are used in the kitchenand furniture industry.Length:250 – 2200 mmHeight:10 – 80 mmWidth:25 – 250 mm