ID: 91
Open
Description
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600
Maquina para hacer el centro o la base de las cubiertas de cocina
The Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 Core Builder is a smart investment by helping you and your company save time and money.
MACHINE SPECIFICATIONS:
Machine Length | 158" |
Machine Width | 89" |
Machine Height | 72" |
Working Height | 36" |
Electrical | 220v 60 Hz 3 Ph |
Air Supply | 100 PSI |
Edge Shaper | 5 HP 5850 RPM 1.25 Spindle Diameter |
Hot Melt Unit | 20 lbs Capacity 1500 Watt Heater |
Feed Rate | 20 FPM |
Center Feed Drive | Non-Skid Pad |
Board Width | 16" Min. to 48" Max |
Board Thickness | 2" Maximum |
Build Up Width | 3/4" Min. to 1-1/2" Max. |
Build Up Thickness | 1-1/2" Maximum |
T-Mold Slotter | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Groover | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12” - REGRESADORA
PARTE:
2FA-RE6X12 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12”
NUEVA CON GARANTIA
The widest cutting resaw
available in our line of products.
If your looking for a low cost
solution to cutting up to 12" wide material, look no further.
These saws are equipped with
20HP motors and 10" wide conveyor belts.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
...
AMXmachinery
APLICADORA DE PEGAMENTO - FINGER JOINT
PARTE: 2TA-SFJ-15G - APLICADORA DE
PEGAMENTO - FINGER JOINTNueva con garantíaPneumatic operates the finger platen up & down to bring
the glue from glue pot to ensure even glue amount for fast application.
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP - S&P
PARTE: AMX-10135 - EXTRACTOR DE TURBINA - 1 HP - S&P
USADO - BUENAS CONDICIONES
MEDIDAS: ANCHO 20” X 12” FONDO X
18” ALTO
ENTRADA REDONDA 5”
SALIDA REDONDA 4-3/4”
1 HP, 220/440V, 3 FASES
6,500.00 MXN
AMXmachinery
INDEX TABLE
PARTE # 11903 – INDEX TABLE – EVANS MACHINERY 4253Very good condition5' x 12' capacityIncluding roller section between panel support railsRails equipped with beveled rollers to transport panel to end stopEnd stop with bump switch to activate panel dropPanel is driven to end stop with powered drive rollerElectric 230 volt, cycle, 3 phase