Identificador: 91
Abierta
Descripción
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600
Maquina para hacer el centro o la base de las cubiertas de cocina
The Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 Core Builder is a smart investment by helping you and your company save time and money.
MACHINE SPECIFICATIONS:
Machine Length | 158" |
Machine Width | 89" |
Machine Height | 72" |
Working Height | 36" |
Electrical | 220v 60 Hz 3 Ph |
Air Supply | 100 PSI |
Edge Shaper | 5 HP 5850 RPM 1.25 Spindle Diameter |
Hot Melt Unit | 20 lbs Capacity 1500 Watt Heater |
Feed Rate | 20 FPM |
Center Feed Drive | Non-Skid Pad |
Board Width | 16" Min. to 48" Max |
Board Thickness | 2" Maximum |
Build Up Width | 3/4" Min. to 1-1/2" Max. |
Build Up Thickness | 1-1/2" Maximum |
T-Mold Slotter | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Groover | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BASTONERA 6" - 8"
PARTE # 1N-BTA-007 - BASTONERA - CAPACIDAD DE 6" - 8" DIAMETRONueva con garantiaMotor principal: 10 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 2 HP, 220V, 60 Hz, 3 fases, A 4,500 RPMVelocidad alimentación: Variable, hasta 12 metros por minutoLa maquina incluye cabezalLa maquina es nueva e incluye garantía de 6 meses en partes mecánicasLos dados para las diferentes medidas se venden por separadoNueva con garantía de 6 meses en partes mecánicasInlcuye 1 juego de cuchillas de 2 navajas de ac...
AMXmachinery
LIJADORA BANDA ANCHA – 1 LIJA - 43” ANCHO - SCM SANDYA 5
PARTE: 12349 - LIJADORA BANDA ANCHA – 1 LIJA - 43” ANCHO - SCM SANDYA 5
USADA - BUENAS CONDICIONESModel 5 CS 110Year: 2002Made In ItalyCondition GoodGENERALMax.
Workpiece Width 43.30 "Max.
Workpiece Thickness 6.70 "# of
Belts 1Type BeltELECTRICALVoltage 220 volts
Phase 3-phase
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
PARTE: 2TA-SET-106TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
Nueva con garantiaOpcionales:Extra Infeed 42” LengthTotal Enclosure CoverFeed MagazineAuto Transfer Line (4 ft x 8 ft) Transfer TableOptional Jump Shaper and Finish Shaper Cutter headsOptional Center Split Saw Station Features:• The automatic high-speed through feed device allows for
perfect finishing at speeds rangingfrom 12 ~ 52 FPM.• Suitable for mass production of woodworking factory for
processin...
AMXmachinery
PARTE: 12462 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
PARTE: 12462 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONESMFG: 2001460V, 3 FASES, 60 HZ
R 960