Identificador: 116
Abierta
Descripción
PARTE: 2EX-DCY-1215 – COLECTOR PARA EXTERIORES – MOTOR 15 HP – 7600 CFM
PARTE: 2EX-DCY-1220 – COLECTOR PARA EXTERIORES – MOTOR 20 HP – 8800 CFM
PARTE: 2EX-DCY-1425 – COLECTOR PARA EXTERIORES – MOTOR 25 HP – 10500 CFM
Nuevos con garantia
Caracteristicas:
Powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions.
This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste.
Electronic controls must be protected from weather.
See comparison chart below for specifications.
2EX-DCY-1215 | 2EX-DCY-1220 | 2EX-DCY-1425 | |
|---|---|---|---|
Horsepower | 15 HP | 20 HP | 25 HP |
Standard Leg Set | L1 | L2/L3 | L2/L3 |
CFM | 7600 | 8800 | 10500 |
Amps @ Voltage | 37A @ 230V | 49A @ 230V | 62A @ 230V |
Dimensions | 16'-3" x 73.25" x 73.25" | 23'-11" x 153.5" x 98.5" | 25'-1" x 153.5" x 98.5" |
Opening Dimensions | 74" x 69" x 72" | 164" x 149" x 91" | 164" x 149" x 91" |
Inlet Size | 14" | 16" | 18" |
Outlet Size | 16" | 18" | 20" |
Rotary Airlock HP | 1/4 HP | 1/4 HP | 1/4 HP |
Chip Dumping Capacity | 10 CFM | 10 CFM | 10 CFM |
Drop Size | 8" x 12" | 8" x 12" | 8" x 12" |
Soft Start | Yes | Yes | Yes |
Weight | 2000 lbs | 2500 lbs | 2850 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1 HP C/U
PARTE: 2AM-220 - LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1
HP C/UMotors: (2) 1 HP 6 pole 3ph Models & Voltage: 221: 120 or 208-240v / 1ph / 50-60hz222: 208-240v / 1 or 3ph / 50-60hz224: 400-480v / 3ph / 50-60hz Variable Speed: AC Inverter 100-1200 rpm Arbor: 1" Dia. by 6" Tall Vertical Travel: 6" Table Travel: 2" Table Height: 36 inches Table Size: 60" x 24" Air Pressure Required: 80 psi minimum Dust Collection: 3" round, 250 cfm The Model 220 P...
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
AMXmachinery
ROUTER CNC - MODEL K
PART # 2TA-K-0404TN - ROUTER CNC - MESA 4' X 4' - MOTOR 3 HP - SIN MESA DE VACIOPART # 2TA-K-0404 - ROUTER CNC - MESA 4' X 4' - MOTOR 3 HP - CON MESA DE VACIOPART # 2TA-K-0408 - ROUTER CNC - MESA 4' X 8' - MOTOR 3 HP - CON MESA DE VACIOPC base CNC controller is set up to accept standard G code programming formats along with on board conversational applications.User friendly IC 2009 powerful closed positioning loop software with Ethernet interface for data transfer from PC.All axis are driven by ...
AMXmachinery
PARTE: 12578 – CHAFLANADORA - HAZELDINE
PARTE: 12578 – CHAFLANADORA - HAZELDINEUSADA – BUENAS CONDICIONES