Identificador: 2339
Abierta
.PNG)
.jpg)
Descripción
COLECTOR DE POLVOS - 3HP - 2CK-UFO102B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 3HP generating 1883 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- CSA / UL magnetic starter included
- 3HP Motor
- 1883 CFM
- 6” main inlet with removable outlet with (3) 4” ports
CFM | 1883 CFM |
Motor | 3 HP |
Main inlet diameter | 6″ |
Connector inlet diameter | (3) 4″ |
Bag Volume | 10.48 cubic feet |
Static pressure of water | 9.26 inch |
Top bags (2) | 18.9″ x 31 ½” |
Bottom bags (2) | 18.9″ x 31 ½” |
Electrics | 230/1/60 = 17 Full Load Amps |
Net weight | 169 lbs |
Shipping weight | 180 lbs |
Shipping dimensions | 48″ x 23″ x 23″ |
Noise Level | 80dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
PARTE:
2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
NUEVA CON GARANTIACapable of resawing large timbers with precise results. With its powerful 30HP variable speed saw motor and variable speed hydraulic feed system the HR400PB can be optimized for any job. Equipped with a large cutting capacity up to 15 ¾” wide and up to 9.8” thick. The saw assembly is raised and lowered electronically using a digital input controller for precise thic...
AMXmachinery1
PARTE: 4NE-5AXISPARS - CENTRO DE MAQUINADO CNC - 5 AXIS - PARS
PARTE: 4NE-5AXISPARS - CENTRO DE MAQUINADO CNC - 5 AXIS - PARSWorking Area: Y:1350MM- X: 2100 MM two different table 1000+1000- Z: 1200 MM• Control Unit: TPA control unit• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Tool Changer: Magazine for 5 pieces• Reductor: Liming FE Series• Spindle Motor: HITECO TILT-J Bi-rotary 2 Axis head• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubricatio...
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL12Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for en...
AMXmachinery1
PARTE: 4NE-FUERTE1325 - CENTRO DE MAQUINADO CNC - 10 HP - FUERTE 1325
PARTE: 4NE-FUERTE1325 - CENTRO DE
MAQUINADO CNC - 10 HP - FUERTE 1325Control Unit HSC-RTEX (TÜRKİYE)• Spindle: HERTZ 8.5 KW 24000 rpm ISO30 (TURKEY)• Vacuum Pump: BLOWER VAKUM POMPASI• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)• Remote Control: YES• Automatic Self Lubrication System: YES ( ILC - Italian )• 10 Tool capacity tool magazine back side of chassis• 10 Toolholder• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136• Automatic Unloading and Cleaning System: Op...