Identificador: 2343
Abierta
.PNG)
Descripción
COLECTOR DE POLVOS - 15 HP - 2CK-DBS15
Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in to your larger waste bin. A pneumatic lever is used to lift the sleeves connecting the system to the dump bin which saves time and effort.
- 15 HP blower motor generating 5000 CFM @ 10.3” WC
- Low RPM blower (1750 RPM) generating only 81 dB
- Convenient self-dumping bin with 168-gallon capacity
- Compact design is ideal for a small to mid sized shop looking for a stand alone or a larger shop looking to add a secondary dust system.
- High efficiency 15HP TEFC motor
- Heavy gauge steel construction for long durability
- Self dumping bin allows operator to quickly, safely, and conveniently dispose of wood waste
- 16” main inlet diameter
- Pneumatic raising / lowering of dust sleeves to connect system with dump bin for added convenience
- High efficiency 1-micron filter bags (36 pcs)
- Manual shaker system for cleaning of filter bags
- Magnetic starter included
- Dust collector comes disassembled
Blower motor | 15 HP |
CFM Capacity | 5000 CFM @ 10.3” WC |
Filter information | 1 Micron Filter Bags: 8” dia. x 63” long x 36 pcs |
Filtration surface (sq.ft) | 394 sq. ft |
Inlet diameter | 16” |
Sound rating (Decibel) | 81 dB |
Disposal capacity | 168 gallons |
Machine dimensions (LxWxH) | 135” x 42.5” x 122” |
Shipping dimensions | Blower = 46” x 43” x 37” @ 748 lbsFrame / Bin / Accessories = 99” x 46” x 49” @ 1056 lbs |
Electrical information | 230/3/60 @ 42 amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA ESCUADRADORA - 10 PIES
PARTE: 2CK-D405M-10Is the ideal panel cutting solution for kitchen cabinet shops, millwork companies, and furniture shops who need a precision saw but only require manual adjustments. Combines a heavy-duty construction with cast iron main table, cast iron saw carriage, and precision sliding table resulting in precise panel sizing with high accuracy and repeatability time after time. The double roller sliding table runs effortlessly and smoothly and the crosscut miter fence can be easily and ...
AMXmachinery1
SIERRA SE VAIVEN - 300 MM
PARTE: 2CK-FR-300 - SIERRA SE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
310 mm
Min.
Working Thickness...
AMXmachinery1
MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
PARTE: 2CK- LMC-418S - MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
SPECIFICATIONS
Thickness of material
¼” to 5”
Width of material
.6” to 8”
Min lenght of material
8” (butt fed)
Feed speeds to
20 – 85 FPM (6 – 25 MPM)
Axial Adjust (side heads)
.8” (20mm)
Axial Adjust
(top/b...
AMXmachinery1
COLECTOR DE ASERRIN - 5 HP
PARTE: 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.5 HP generating 2863 CFMBase is mounted on casters so it can be moved around...