Identificador: 1746
Abierta
Descripción
PARTE: 2CK-UFO102B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 3HP generating 1883 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- CSA / UL magnetic starter included
KEY ADVANTAGES
- 3HP Motor
- 1883 CFM
- 6” main inlet with removable outlet with (3) 4” ports
|
CFM |
1883 CFM |
|
Motor |
3 HP |
|
Main inlet diameter |
6″ |
|
Connector inlet diameter |
(3) 4″ |
|
Bag Volume |
10.48 cubic feet |
|
Static pressure of water |
9.26 inch |
|
Top bags (2) |
18.9″ x 31 ½” |
|
Bottom bags (2) |
18.9″ x 31 ½” |
|
Electrics |
230/1/60 = 17 Full Load Amps |
|
Net weight |
169 lbs |
|
Shipping weight |
180 lbs |
|
Shipping dimensions |
48″ x 23″ x 23″ |
|
Noise Level |
80dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 14 PULGADAS
PARTE: 2CK-SRS330Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel...
-500x500.jpg)
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL18Represents a state-of-the-art finger jointing production line, meticulously engineered to transform wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliabi...
AMXmachinery1
SIERRA CINTA - 20 PULGADAS
PARTE: 2CK-HB500RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum ma...