Identificador: 1938
Abierta
Descripción
PARTE: 12380 - CNC TALADRO, ENGOMA, INSERTA – PILLAR
USADA – MUY BUENAS CONDICIONES
Clamps working, software, stops and such in operating condition.
This machine has Windows 7 installed and the electrical cabinet is cleaned out in addition.
The dowel inserter has been serviced and works correctly.
Been completely gone thru and serviced, with manuals.
Machine is 100%
2016 model year
PILLAR H-49
Machine Has Been Fully Serviced
New Injector Service Kit Installed
49" work field
2 Zones
X Axis CNC control for positioning
4 clamp Hold-downs
Glue injecting system (injects glue or water)
1 HP High Frequency 18,000 RPM Direct Drive Spindle
12" Diameter vibratory dowel bowl mounted above machine (holds 800 dowels)
10" Industrial Color Touchscreen PC for programming and running programs
Digital Mechanical readouts for height and depth
1/2" Thick Machined Aluminum Work Surface
Windows 7 Operating System
Shipping Footprint: 72 (length) x 50 (width) x 84 (height)
Weight: 2500 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CATENALLI (2) MAQUINAS
PARTE: 12202 – ESPIGADORA DOBLE DE CADENA - CATENALLI (2) MAQUINASUSADA - EN BUENAS CONDICIONESLinea de moldurado tanto longitudinal como de cabezasTongue
and Groove line, makes heads and longitudinal ways to manufacture engineer or
solid wood flooringBrand Catenalli380
voltsMaquina longitudinal:Max
width working boards 300mm , Min wide 80mm.2
motors per each side 7.5 HP each oneMaquina transversal:Max length working boards 2450mm , Min Length 300mm.3
motors of each side , 7.5 HP each o...
AMXmachinery
REASERRADORA – 1 BANDA – WEST PLAINS
PARTE: 12276 - REASERRADORA – 1 BANDA – WEST
PLAINS
USADA – BUENAS CONDICIONES40HP
CAPACIDAD DE ANCHO 14”
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP - S&P
PARTE: AMX-10135 - EXTRACTOR DE TURBINA - 1 HP - S&P
USADO - BUENAS CONDICIONES
MEDIDAS: ANCHO 20” X 12” FONDO X
18” ALTO
ENTRADA REDONDA 5”
SALIDA REDONDA 4-3/4”
1 HP, 220/440V, 3 FASES
6,500.00 MXN
AMXmachinery
LIJADORA DE TAMBOR 16"
PARTE # SIL-DC-DRUSA - LIJADORA DE 1 TAMBOR - CAPACIDAD DE ANCHO 405 MMMOTOR: 1.5 HP, 110/220V, 60 Hz, 1 FASEDIMENSIONES DE LA LIJA: 132 X 410 MMANCHO MAXIMO DE LIJADO: 405 MMALTO MAXIMO DE LA MADERA: 130 MMPROFUNDIDAD MAXIMA DE LIJADO: 0.30 MMVELOCIDAD: 1720 RPM, ALIMENTADOR: 0 - 3 MTS/SEGDIAMETRO DE LA TOMA DE ASPIRACION: 4"PESO: 96 KGSEMPAQUE: 1 CAJAMEDIDAS: CAJA DE MADERA 92 CM LARGO X 63 CM ANCHO X 123 CM ALTO