Identificador: 2521
Abierta
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
CIERRA CINTA 24" 2 EN 1 PARTE: 2CK-HB600A
Is heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenance.
- 2-in-1 bandsaw can run up to a 2” wide blade for resawing and down to a ¼” for curve cutting
- Cast iron saw wheels are precision machined and laminated with rubber for accurate blade tracking and slippage prevention
- Cast iron worktable is precision ground and can tilt to 45o
- Blade tension is conveniently adjusted by means of a handwheel and tension is shown by a scale for accurate tension setting.
- Heavy gauge steel frame ensures vibration free cutting
- Upper and lower guide assemblies with Bakelite side guides to ensure cool running of the saw blade and a back guide thrust bearing
- Micrometric adjustment to upper guide by rack and pinion
- Foot brake for quick stopping of the blade
Saw wheel diameter | 23 ½” |
Table size | 31 ½” x 23 ¾” |
Table tilting | 0° – 45° |
Throat capacity | 22-7/8″ |
Height capacity | 13 ¾” |
Width of wheel | 2″ |
Blade speed | 710 RPM (4458 FPM) |
Blade length | 173-5/8″ ~ 176 ½” |
Blade width | ¼” ~ 2″ |
Motor | 5 HP |
Dust hood diameter | 4” x 2 |
Net weight | 748 lbs. |
Gross weight | 990 lbs. |
Machine size (LxWxH) | 42″ x 31″ x 81″ |
Packaging size (LxWxH) | 85″ x 25″ x 43″ |
Electrical | 230/3/60 = 12.4 Full Load Amps575/3/60 = 4.5 Full Load Amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE DE VAIVEN
PARTE: 2TA-TRS-150F - SIERRA MULTIPLE DE VAIVENFEATURESMinimum kerf multi blade frame saw designed to maximize production and minimize material loss.Thin frame saw design accepts different saw frames & blade combinations.Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time.Production times are reduced because of the machine's du...
AMXmachinery1
TORNO 32 x 80''
TORNO 32 x 80'' PARTE: 2GM-GML-3280 Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor. ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision gro...
AMXmachinery1
SIERRA DOBLE - 45 GRADOS - 24 PULGADAS
PARTE: 2CK-PCM610Is a precision pneumatic saw designed for cutting miters up to 60o in either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade ...
AMXmachinery1
CEPILLO 1 CARA - 26 PULGADAS
PARTE: 2CK-CM626Is a production planer with high horsepower and feed rates. It is equipped with our spiral insert knife cutterhead with two sided replaceable knives which produce a smooth planed finish with maximum cutting depth. With upper and lower driven feed rollers can plane even the most difficult to feed material. The powerful 20HP motor can ensure optimum stock removal even on full width boards. With infinitely variable feeds the operator has full control to ensure the optimum fe...