Identificador: 1743
Abierta
Descripción
PARTE: 2CK-GT-HD
- Heavy-duty cardan shaft drive for the highest durability and increased feed speeds
- Available in 24”, 32”, 39”, and 52” wide models
- Solid cast-iron construction greatly reduces vibration resulting in improved output quality and machine durability
- Cast iron bed is precision machined and chrome plated to ensure longevity and precision
- Pin type carpet feed system passes the material over the bottom head to ensure a flat surface
- Spiral insert knife cutterheads with 8 rows of two-sided 30x12x2.5mm solid carbide insert knives provide superior stock removal, reduced machine load and noise, and optimum finish quality
- Additional idle and driven table rolls ensure consistent feeding of the workpiece
KEY ADVANTAGES
- Adjustable infeed bed by easily accessible handwheel to set desired stock removal on the bottom head
- Easy to access control panel with individual ammeters for load monitoring and hour meter to aid in maintenance planning
- Cutterheads are mounted in precision NSK class-7 ball bearings & precision housings
- Cutterhead starters are Y-Delta providing soft start to the heads for reduced power consumption on motor start-up
- Sectional serrated infeed roll before the top cutterhead
- Variable feed speed by frequency inverter (VFD) with digital display for the feed speed
- Digital thickness control for quickly and precisely setting the desired thickness with accuracy of +/- 0.002” (0.05mm)
- Upper assembly is adjusted for desired thickness by four large diameter cylindrical posts
- Automatic lubrication to the conveyor feed system
- High quality Schneider electrical components to CSA/UL standard
|
|
GT610SSHD |
GT820HD |
GT1000HD |
GT1320HD |
|
Maximum working width |
24″ |
32″ |
39″ |
52″ |
|
Maximum working thickness (standard) |
8″ |
8″ |
7″ |
7″ |
|
Minimum working thickness |
0.47″ |
0.47″ |
0.47″ |
0.47″ |
|
Feed speed (variable) |
32 ~ 130 FPM |
32 ~ 82 FPM |
32 ~ 82 FPM |
32 ~ 82 FPM |
|
Cutterhead diameter |
6″ |
6″ |
6.9″ |
6.9″ |
|
Cutterhead speed |
4200 RPM |
4200 RPM |
4200 RPM |
4200 RPM |
|
Bottom cutterhead motor |
30HP (40 opt.) |
40HP (50 opt.) |
40HP (50/60 opt.) |
50HP (60 opt.) |
|
Top cutterhead motor |
40HP (50 opt.) |
50HP (60 opt.) |
50HP (60/75 opt.) |
60HP (75 opt.) |
|
Feed drive motor |
7.5 HP |
10 HP |
15 HP |
15 HP |
|
Elevation motor |
2 HP |
2 HP |
2 HP |
2 HP |
|
Machine dimensions (LxWxH) |
118″ x 67″ x 67″ |
120″ x 77″ x 69″ |
120″ x 85″ x 67″ |
120″ x 97.2″ x 67″ |
|
Shipping dimensions (LxWxH) |
122″ x 73″ x 72″ |
124″ x 81″ x 77″ |
124″ x 91″ x 72″ |
124″ x 106″ x 72″ |
|
Machine weight |
13640 Lbs. |
18700 Lbs. |
20900 Lbs. |
23100 Lbs |
|
Shipping weight |
14080 Lbs. |
19140 Lbs. |
21340 Lbs. |
23980 Lbs. |
|
CFM dust requirement |
4200 CFM |
4750 CFM |
5200 CFM |
5800 CFM |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
CIERRA CINTA 20"
CIERRA CINTA 20" 2CK-HB500RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that ass...
AMXmachinery1
SIERRA MULTIPLE PARA CORTE DELGADO
SIERRA MULTIPL PARA CORTE DELGADO 2CK-MRS12The Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve3 sets of Anti-Kickback Fingers 2 top, 1 bottomPowered Rise & Fall to the pressure rollersNew style round Fence Bar sup...
AMXmachinery1
3 STATION CNC
3 STATION CNCThroughfeed CNC milling and drilling machine with 3 work stations. A very flexible machine.Description:• Hopper with integrated separation for items with delicate or painted surfaces• Careful belt transport of items through the machineExtra• Waste Conveyer• Return conveyor with integrated brush cleaning unitWorkstation 1:Vertical and horizontal independent spindle drilling heads (customer specific)Workstation 2:Horizontal drilling groups left and rightWorkstation 3:Vertical ...