Identificador: 1582
Abierta
Descripción
PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES
460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min.)
- “Carpet” style
feed system with 1,500 spring loaded spikes
- 2 HP 4-column
feed carpet/top-head elevation motor
- (3) bottom &
(3) top powered feed rollers & (4) bottom & (1) top idle feed rollers
- Digital thickness
setting controls with cutterhead motor amp meters
- 34” pass-line
height
- (1) automatic
& (1) manual oiler, (low oil shut-off)
- (4) 6” diameter
dust ports, (~6,000 CFM)
- 90 PSI pneumatic
requirement, (3/8'' diameter inlet)
- 75 dB sound rating
- 115” L x 88” W x
70” H approximate overall dimensions
- Weighs
approximately 15,500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
AMXmachinery
FINGER JOINT – INDUSTRIAL
PARTE: 12140 –
FINGER JOINT – INDUSTRIAL
USADO – BUENAS CONDICIONES
Video1: https://vimeo.com/475686380
AMXmachinery
PARTE: 12321 - DOBLADORA DE CORTINA - 6'6" x 10 GA
PARTE: 12321 - DOBLADORA DE CORTINA
- 6'6" x 10 GA
USADA - BUENAS CONDICIONESModel no. QHD-6020Bending capacity:
6'6" x 10 ga. mild steelTonnage
capacity: 70
tonsOverall length of bed & ram: 80"Distance between housings: 61"Stroke:
6.3"Open
height:
12.2"Throat
depth:
13"Width of
bed:
4.9"Speeds
approx....
AMXmachinery
SIERRA TRONZADORA 18" IZQUIERDA
PARTE: 1SL-DC-FUCS-18 - SIERRA TRONZADORA DE 18"NUEVA CON GARANTIAMOTOR: 7.5 HP, 220V, 60Hz, 3 FASESDISCO: 18"SUJECION DE LA MADERA AL EFECTUAR EL CORTEELEVACION DEL DISCO CON PEDAL NEUMATICOVELOCIDAD DE SUBIDA Y BAJADA DEL DISCO: REGULABLEPRESION DE AIRE 4.5 KG/CM2DIMENSIONES DE LA MESA: 650 X 700 MMALTURA DE LA MESA: 890 MMTOMA DE ASPIRACION: 4"MESAS DE ENTRADA Y SALIDA CON RODILLOS DESLIZABLES ESTAN INCLUIDASMEDIDAS MESAS ENTRADA Y SALIDA: 36" LARGO X 15-3/4" ANCHO, 5 RODILLOS POR MESA, DIA...