Identificador: 1925
Abierta
Descripción
PARTE: - CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH
USADO - BUENAS CONDICIONES
Mfg: 2006
15" width capacity
6" height capacity
Helical heads
Top head 20HP
Bottom head 15HP
20-90 FPM
Motorized opening (1 HP)
460 volt 3 phase
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ALIMENTADOR PARA SIERRA CINTA - 1/8 HP 220V, 1 FASE
PARTE: 2SG-AF06 - ALIMENTADOR PARA
SIERRA CINTA - 1/8 HP 220V, 1 FASE
Nuevo con garantía
Para sierras cintas hasta de 24”Ideal
for light to medium duty use on a bandsaw and is spring-loaded, ensuring smooth
and accurate cuts. A
much better alternative to using standard 3 and 4 wheel machines.Equipped
with two 8 x 1" Polyurethane Rollers and can be adjusted in and out
depending on the size of your bandsaw table. FeaturesVariable
Speed - 0-40Ft/min1/8
HP Motor 220V, 1 faseMax
...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...
AMXmachinery
SIERRA OPTIMIZADORA – DIMTER WEINIG S90
PARTE: 12392 – SIERRA OPTIMIZADORA
– DIMTER WEINIG S90
USADA – MUY BUENAS CONDICIONES
Incluye 2 empujadores para ClasificarYear
of Manufacture: 2005Condition:
GoodElectric: 480 Voltage, 60 Cycle, 3 Phase GREAT
PUSHFEED SAW WITH ACCURATE CUTTING, CRAYON DEFECTING OF INBOUND LUMBER UP TO 14'0"
LENGTHS.Working
dimensions: Width 2" to 8"; thickness 3/8" to 2" and length
3' to 14-3/4" (4.5M).Motor:
10 HP saw motor at 4,800 RPM. with 16" saw blade.Feed:
Variable speed PUSH up to...
AMXmachinery
ASERRADERO HORIZONTAL – 1 BANDA – MOTOR 30 HP
PARTE: 3HP-HP-LOG – ASERRADERO HORIZONTAL
– 1 BANDA – MOTOR 30 HP
NUEVO CON GARANTIA
SCRAGG MILLVideo: https://vimeo.com/572381491
Specification:
1.Working
Capacity: 120-400mm (D)
2.Balde
Elevation Distance from Conveyor: 10-235mm
3.Saw
Wheel Motor: 30HP
4.Elevation
Motor:1/4HP
5.Saw
Blade Tension by Hyd. Compensation System
6.Conveyor
Length: 4500mm
7.Hydraulic
Motor: 3HP
8.Saw
Wheel Dimension: 34"(D) x 2"(Thickness)
9.
Saw Balde Size: 5310mm(...