Identificador: 1583
Abierta
Descripción
PARTE: 12336 - CEPILLO 1 CARA - CAPACIDAD 18”
USADO - BUENAS CONDICIONES
7 1/2-HP 230 Volt 3-Phase
3 Knife Straight Cutter Head
All 5 belts have been changed
Machine has been cleaned, sanded, primered & painted
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...
AMXmachinery
LAMINADORA 62" RODILLOS PLANOS
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12” - REGRESADORA
PARTE:
2FA-RE6X12 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12”
NUEVA CON GARANTIA
The widest cutting resaw
available in our line of products.
If your looking for a low cost
solution to cutting up to 12" wide material, look no further.
These saws are equipped with
20HP motors and 10" wide conveyor belts.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
...
AMXmachinery
SIERRA OPTIMIZADORA – DIMTER WEINIG S90
PARTE: 12392 – SIERRA OPTIMIZADORA
– DIMTER WEINIG S90
USADA – MUY BUENAS CONDICIONES
Incluye 2 empujadores para ClasificarYear
of Manufacture: 2005Condition:
GoodElectric: 480 Voltage, 60 Cycle, 3 Phase GREAT
PUSHFEED SAW WITH ACCURATE CUTTING, CRAYON DEFECTING OF INBOUND LUMBER UP TO 14'0"
LENGTHS.Working
dimensions: Width 2" to 8"; thickness 3/8" to 2" and length
3' to 14-3/4" (4.5M).Motor:
10 HP saw motor at 4,800 RPM. with 16" saw blade.Feed:
Variable speed PUSH up to...