ID: 1733
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 2CK-P24HV
- Spiral Insert Knife Cutterhead with replaceable carbide insert knives for long life and smooth cutting action (132 inserts, 14mmx14mmx2mm)
- Sectional chip breakers
- Serrated sectional infeed roll conforms to material which is not yet flat
- Anti-kickback fingers for safe operation
KEY ADVANTAGES
- 2-feed speeds
- Double bed rolls which are conveniently adjusted from the front of the machine to assist with planing difficult to feed material
- Side handwheel with linear scale for table adjustment
- Polyurethane outfeed roll which will not mark your material after it has been planed
- Flip open top lid with limit switch for safe & convenient changing of the insert knives
|
Maximum planing width |
24″ |
|
Maximum planing thickness |
8″ |
|
Feed speeds (2) |
20 & 30 FPM |
|
Main motor |
7.5 HP |
|
Cutterhead diameter |
3-1/16″ |
|
Min. length |
8″ |
|
Table rise & fall |
Manual |
|
Dust port (1) |
6” |
|
Net weight |
950 lbs. |
|
Machine dimensions (LxWxH) |
48” x 36” x 50” |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
PARTE: 3AM-G4028 - SIERRA CINTA PARA METAL
PARTE: 3AM-G4028 - SIERRA CINTA PARA METALMax. Cutting Diameter ： Round: 280 mmPlate: 190*400 mmBlade Speed： 25.46.79 m/minBlade Size： 0.9*27*3505 mmMotor Output： 2.2 kwHydraulic Pressure： 0.37 kwCoolant Pump： 0.04 kwTable height： 600 mmMachine Size(L*W*H) ： 1800*800*1230 mmNet Weight： 800 kgVice clamping ： HydraulicBlade tensioning form ： MaunalFeeding cut adjust way ： Hydraulic steplessFeeding way ： ManualHydraulic cooling way ： Natural Wind coolingChip conveyor wa...
AMXmachinery1
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
2 EXTRACTORES IGUALES EN EXISTENCIA
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-2 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 4HX98B
Base 34” X 34”
Diámetro total: 42”
Altura total: 36”
Baleros nuevos Motor y Extractor
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDOR, actualmente conectado a 115VVi...
AMXmachinery1
TROMPO AUTOMATICO - CON SISTEMA DE ALIMENTACION
PARTE: 2CK-DT-1128A
Range of cutter diameter
1” to 6” (changeable)
Table diameter
18”
Table speed
1.5 ~ 4.0 RPM (4 speeds)
Spindle diameter
30 mm
Spindle speed
9000 RPM
Cutter size
100 mm
Spindle height
4”
Follower roller diameter
100 mm x 1
Table drive moto...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downsHigh grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger guardFront supports and (2) side g...