Identificador: 243
Abierta
Descripción
PART # 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURAS
Nueva con garantÃa
Features:
PLC control for easy operator and variability setup.
Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.
The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.
Individual painting volume adjustment control for each spray gun.
Variable feed speed control for the best finish result.
Two trays to collect unused paints for re-used.
Powerful collection fan for air purifies by filter and totals enclose cabinet to achieve no pollution.
Heavy sheet metal total enclosure frames and see-through cabinet window.
Standard equipment with one pneumatic paint pump and four spray guns.
Extra spray guns are optional.
SPECIFICATIONS | TS-12ATSP | TS-24ATSP | TS-24ATAM | TS-36ATSP |
Max. Working Width | 12" | 24" | 24" | 36" |
Max. Working Thickness | 3-1/2" | 3-1/2" | 3-1/2" | 3-1/2" |
Max. Working Length | Infinite | Infinite | Infinite | Infinite |
Min. Working Length | 19" | 21-1/2" | 21-1/2" | 35" |
Feed Speed (Variable) | 32 ~ 96 FPM | 33 ~ 96 FPM | 34 ~ 96 FPM | 34 ~ 96 FPM |
Air Spray Gun | 4 PCS | 6 PCS | 4 PCS | 9 PCS |
Paint Pump | 1 Set | 1 Set | 1 Set | 3 Set |
Air Mix Spray Gun | - | - | 2 PCS | - |
Piston Pump | - | - | 1 Set | 3 Set |
Exhaust Fan Motor | 3 HP | 5 HP | 5 HP | 5 HP |
Machine Size (L x W x H) | 138" x 62" x 99" | 138" x 73" x 78" | 138" x 73" x 78" | 236" x 102" x 88" |
Net Weight | 3200 LBS | 3960 LBS | 3980 LBS | 5260 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
CALDERAS DE BIOMASA – DESDE 3 KWT HASTA 30 MW TERMICOS
PARTE: 4UN-001
- CALDERAS DE BIOMASA – DESDE 3 KWT HASTA 30 MW TERMICOS
Calderas desde 300 KW hasta 30 MW térmicos, para agua
caliente, sobre calentada, vapor saturado y sobre aquesido, aceite térmico, las
cuales pueden quemar, o biomasa convencional, o biomasa no convencional.Valorizamos la biomasa y los subproductos derivados de
procesos agrÃcolas y industrialesTransformándolos en energÃa limpiaCombustible Biomasa – Rendimiento Alta TecnologÃa –
Emisiones Bajo a Zero CarbÃ...
AMXmachinery
ROUTER CNC – 5 X 10 PIES – MULTICAM
PARTE:
12358 – ROUTER CNC – 5 X 10 PIES – MULTICAM
USADO – MUY BUENAS CONDICIONES
Modelo 3-204
automatic tool changer
8 position rack
dust collector
new 2014
208/3ph
vacuum system included
LENGTH: 120"
WIDTH: 60"
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
PARTE:
2PG-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433
LITROSNuevo con garantÃa
Max. Temperatura: 1287 grados centÃgrados
21,600 Watts, 90 Amps.
Medidas interiores: ancho 666 mm x largo 686 mm x 914 mmQuick to loadIf you fire ware that is similar in size from one firing to the
next, you can leave the shelves and posts stacked in the Dragon between
firings. Reach into the kiln to remove the ware and reload the kiln for the
next firing.Since you are load...