Identificador: 844
Abierta
Descripción
PARTE: 12007 – CASETA DE PINTURA – 245 CM FONDO X 307 CM ANCHO - SPRAY ZONE – 2 en existencia
Nuevas
Modelo: SZ-IOP 8 SE
Marca: Spray Zone
Hechas en USA
Dimensiones: 8 pies fondo x 10 pies ancho x 8 pies alto ( 245 cm fondo x 307 cm ancho x 245 cm alto)
Paneles de 18 ga
Motor: 2 HP, 220V, 3 fases
Abanico: 30” diámetro a 12,500 CFM
Filtración:
16 filtros de fibra de vidrio
2 lamparas para tubos fluorescentes
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – WEEKE
PARTE: 12381 - CNC TALADRO, ENGOMA,
INSERTA – WEEKE
USADA – MUY BUENAS CONDICIONESYear
2013Model
Optimat ABD-050Year
2013460
volt three phase, 60 hz, 10 amps(1)
horizontal CNC controlled X-axis drilling head0.55
kw drill head drive motorSpindle
speed 7500 rpmMax
tool length 70 mm (2.75")(1)
glue injector with dowel insertion headTop
mounted vibrating dowel hopper feederPneumatic
actuation of drill head stroke and dowel insertion head(2)
independent table work zones (can be us...
AMXmachinery
PARTE: 12543 - TRITURADOR - ASTILLADOR MADERA - 48” - PRECISION
PARTE: 12543 - TRITURADOR - ASTILLADOR MADERA - 48” -
PRECISION
USADO - BUENAS CONDICIONES
AMXmachinery
LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1 HP C/U
PARTE: 2AM-220 - LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1
HP C/UMotors: (2) 1 HP 6 pole 3ph Models & Voltage: 221: 120 or 208-240v / 1ph / 50-60hz222: 208-240v / 1 or 3ph / 50-60hz224: 400-480v / 3ph / 50-60hz Variable Speed: AC Inverter 100-1200 rpm Arbor: 1" Dia. by 6" Tall Vertical Travel: 6" Table Travel: 2" Table Height: 36 inches Table Size: 60" x 24" Air Pressure Required: 80 psi minimum Dust Collection: 3" round, 250 cfm The Model 220 P...
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)