ID: 2532
Open
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MR
Is an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either flush trim or radius trim the end of the panel. Additionally, the machine is equipped with flush trimming, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
- Compact design makes it the ideal edgebanding solution for small workshops.
- Pre-milling the panel ensures optimum edge quality prior to edgebanding.
- Dual purpose end trim and radius trimming system activated from the control panel.
- Precise adjustments for optimum edge quality.
- Chain feed system ensures consistent feeding of material for consistent results.
- Available in 230V 1 or 3 phase.
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm.
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring-loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy-duty pressure beam with extendable workpiece support
- Heated infeed fence for preheating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
Feed motor | 1 HP | 0.75 kW |
Pre-milling motor | 2 HP | 1.5 kW |
End trim motor | 1/3 HP | 0.25 kW |
Top & bottom trimming motor | ¾ HP | 0.55 kW |
Buffing motor (1 phase) | 0.16 HP | 0.12 kW x 2 |
Buffing motor (3 phase) | ¼ HP | 0.18 kW x 2 |
Heated infeed fence | ½ HP | 0.4 kW |
Glue pot | 1 ¾ HP | 1.315 kW |
Total connected power | 8 HP | 6 kW |
INCH | METRIC | |
Feeding speed | 23 FPM | 7 m/min. |
Panel thickness | 0.472~1.77″ | 12~45 mm |
Edge thickness | 0.0158”~0.118” | 0.4 ~ 3 mm |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTRO
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTROControl Unit: TPA Control UnitX AXIS - 1100 MMY AXIS - 1300 MM
Z AXIS - 700 MM• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Reductor: Liming FE Series• Spindle Motor: ML-1C 7.5/12 24 ER32 CROSS 2+2 ENDS• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubrication System• Machine Dimension: Length: mm * Width: mm * Height:...
AMXmachinery1
SIERRA MULTIPLE - RODILLOS - PIEZAS CORTAS
PARTE: 2CK-131HMMAIN FRAME, MACHINE BED & ENCLOSURE1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head endAll Bedplates, Tables and Fences are Hard ChromedLift up sound and safety Enclosure including safety interlocks and good lightingDRIVE INCLUDESMaintenance free Full Cardan Shaft Drive to feedworks for balanced dr...
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
-500x500.png)
AMXmachinery1
DOBLADORA HIDRAULICA ROTATORIA
DOBLADORA HIDRAULICA ROTATORIA PARTE: 2GM-DB-60ATaiwan MachineISO 9001 certifiedNC-control for bending angle adjustmentLED degree indicator with automatic stop programming, to get as true reading of bending degree.Up to 50 jobs memory; each job program contains 9 stepsCounter roller holder comes standard with quick adjustmentThis easy to use hydraulic tube draw bender has an incredible capacity of 2” tube with .12” wall thickness and 1-1/2” schedule# 4...