Identificador: 1548
Abierta
Descripción
PARTE: 12319 - CALDERA - HURST HIBRIDAS 200, 300, 600 HP
USADAS - BUENAS CONDICIONES
Hurst Hibrida 600 HP 150 PSI
Hurst Hibrida 200 HP 150 PSI
Hurst Hibrida 300 HP 150 PSI
Each system should include (email for specifics):
Hurst Hybrid Vessel
Hurst Boild Furnace with cast grates
Hurst underfeed stoker system
Hurt Metering conveyor system
Overfire air combustion fan
Underfire air combustion fan
Hurst combustion air preheater
Access platforms with ladders
Boiler system control panel (PLC, frequency drives, UDC, control for automatic operation)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16...
AMXmachinery
CONTORNEADORA BACCI
PARTE # 10161 – CONTORNEADORA – BACCI PC-STPEn buenas condiciones de operaciónPerfiladora y contorneadora2 cabezales con motores 5.5 HPHidráulica y neumáticaLargo útil de trabajo 1200 mmAvance Hidráulico4 pistones neumáticos
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
PARTE: 12584 - TALADRO MULTIPLE – RITTER R246
PARTE: 12584 - TALADRO MULTIPLE – RITTER R246USADO - MUY BUENAS CONDICIONES(2) Bottom vertical drill heads, each with (23) gear driven spindles on 32 mm centers (24 RH and 22 LH rotation), (2) 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control. Equipped with: (4) Overhead adjustable pneumatic holddowns on each head, 72...