ID: 1259
Open
Description
PARTE # 4MU-MPP60 – BRIQUETEADORA - MOTOR 5.5 KW (7.5 HP) – 30-60 KG/HR
PARTE # 4MU-MPP80 – BRIQUETEADORA - MOTOR 5.5 KW (7.5 HP) – 35-80 KG/HR
Flete incluido a las principales ciudades de México
Nueva con garantía
Type | Desempeno Kg/hr | Motor KW | Motor HP |
4MU-MPP60 | 30-60 | 5.5 | 7.5 |
4MU-MPP80 | 35-80 | 5.5 | 7.5 |
4MU-MPP110 | 50-110 | 5.5 | 7.5 |
4MU-MPP180 | 100-180 | 9.2 | 12 |
4MU-MPP280 | 120-280 | 9.2 | 12 |
Performance: 30 - 550 kg/h
Waste with a maximum moisture content of 18 % from wood, straw, miscanthus (elephant grass), paper, cardboard, containers, plastics and textile fibres can be converted into briquettes with the briquetting presses. The pressing works by means of hydraulic pressure without adding any additives or glue.
Depending on the size and type of material, briquetting can reduce the volume of the basic raw material by up to 90 %. The volume of a standard hopper is about 1.0 m³. Also offers large volume hoppers, as well as special tanks combinable with a dust extraction system and filter plant. Specified for the production of briquettes from homogenous material. Depending on the type of machine, the briquette length is 40 to 100 mm. Using a convenient material, it is also possible to produce 200-300mm long briquettes. Shavings are fed in the hopper, where it is dosed and supplied by an integrated agitator into the pre-compression cavity. In this cavity runs a hydraulic piston, which pre-compresses the material and feeds the main cylinder. The hydraulic piston presses the material into the closed sleeve until the adjusted pressure is reached (which is usually set up to 80 bars). Then the sleeve opens and finally a stabile briquette is produced. The more homogeneous the material, the more uniform are the results of the produced briquettes.
Benefits of Briquetting:
Generating resource from waste
Briquetting reduces waste volumes by up to 90 %
Savings on storage and transport costs
Reduction of waste disposal costs
Profitable selling
Reduction in the danger of fires and explosion by means of reducing dust emissions
2,1 kg briquettes correspond the heating value of 1 liter oil
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 2
MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 2USADAS - BUENAS CONDICIONES - EN VENTA EN MEXICOPARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”PARTE: 11722 - SECANTE DE CHAPA - 3 CAMASPARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS - EN FABRICACIONPARTE: 11724 - CALDERA DE 150 HP A BASE ASERRINPARTE: 11725 - MESA VERDE PARA TORNO DE 8 PIESPARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGOPARTE: 11726 - AFILADORA DE CUCHILLASPARTE: 11758 - PARCHADORA RAINMA...
AMXmachinery
COMPRESOR DE TORNILLO – 5 HP – GARDNER DENVER
PARTE: 12301 – COMPRESOR DE
TORNILLO – 5 HP – GARDNER DENVER
USADO - BUENAS CONDICIONES
460V,
3 PH. 5 HP
Total
running hrs. 227
Machine
type L05
Tested
good
AMXmachinery
MOLDURADORA 5 CABEZAS WEINIG
PARTE # 11987 – MOLDURADORA WEINIG 23 - 5 CABEZALES5-HeadManual setupsCentral Lubrication SystemSpecificationsHead sequence: Bottom 7.5 KW (10hp), right & left by 11 KW(15hp) motor, top 11 KW (15 hp), bottom 7.5 KW (10hp)feed 5hp motor1½” Spindles 6,000rpm Cutterhead20-78 FPM Feed speed9-1/16″ x 4-11/16″ capDimensions: L 126″x W 77″x T 61″5,500lb
AMXmachinery
SIERRA DE PANELES 3200 MM
PARTE # 2TA-TS-P330 - SIERRA DE PANELES AUTOMATICASpecifications2TA-TS-P330CapacityMax. Cutting Length126" (3200 mm)Max. Cutting Depth3" (80 mm)Max. Cutting Height126" (3200 mm)Main SawbladeDiameterØ14" (Ø355 mm)Arbor DiameterØ1" (Optional: 1" (30 mm))Speed4800 RPMScoring SawbladeDiameterØ7" (Ø180 mm)Arbor DiameterØ1" (Optional: 1" (30 mm))Speed6500 RPMSaw CarriageFeeding Forward Speed5 ~ 37 M/ minReturn Speed67 M/ minMotorMain Sawblade Motor13 HP (Optional:15 HP)Saw Carriage Drive Motor2 ...