Identificador: 59
Abierta
Descripción
PARTE # 2TA-BP-100 - BRIQUETEADORA MOTOR 7.5 HP
- Use wood chips, saw dust and various biomass/ag residues to make the briquettes.
- Cost saving management of waste material by reducing the volume of waste to be handled.
- Effectively helps with compliance of local regulations mandating reduction of solid waste.
- Converts waste into a valuable heating source for colder climates
- Increases profitability by converting waste into a marketable product.
- Design allows for incorporation of multiple units in parallel for unlimited capacity.
| Specifications | BP-100 |
|---|---|
| Installed Power | 7.5 HP |
| Ferrule Dimensions | Ø1000 H 36.22" (920mm) |
| Max. Volume of Saw Dust in a Ferrule | 0.8m³ |
| Briquette Diam | 2" (50 mm) |
| Power | 7.5 HP |
| Pump | 26cm³ 1000g group 2 |
| Max. Working Pressure | 15MPa |
| Dimensions | 66" x 43" x 59" (1680 x 1100 x 1500 mm) |
| N. W. | 1499 LBS (680 kg) |
| G. W. | 1874 LBS (850 kg) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 3EN-EWS30-2X3 - ASTILLADORA - RASURADORA DE MADERA - 10 HP X 4 MOTORES
PARTE: 3EN-EWS30-2X3
- ASTILLADORA - RASURADORA DE MADERA - 10 HP X 4 MOTORES
Nueva con garantía
Tamaño rasuradas: 2 x 3 cm x espesor 0.2 - 0.5 mm
Largo de madera máximo: 140 cm
Diámetro de madera máximo: 60 cm
Motores: 4 × 7.5 + 3 KW
Cabezales cortadores: Set de 4
Navajas:
72 × 4 piezas
Capacidad de producción: 1200-1500 kg por hora
Tamaño maquina: 4000×1600×1500 mm
Peso:
3000 kg
AMXmachinery
TORNO COPIADOR
PARTE # SIL-DC-MC1100 - TORNO - 1100 MMNUEVO CON GARANTIAMOTOR: 1 HP, 110V, 60Hz, 1 FASECAPACIDAD MAXIMA DE VOLTEO: 350 MMDISTANCIA ENTRE PUNTOS: 1100 MMVELOCIDAD VARIABLE: 600 - 2400 RPMPESO: 92 KGSEMPAQUE: 1 CAJAOPCION COPIADORA:DC-CD - ADITAMENTO COPIADOR
AMXmachinery
TALADRO UNION BASTIDORES - 2 TALADROS
PARTE # 2RT-R220T - TALADRO PARA UNION BASTIDORES - 2 TALADROS1.5 HP Spindle Drive Motor, TEFC1” Spindle CentersManual Controls, 110 V, TEFCFoot Actuated Boring CycleTooling included14 Degree Double Spindle1” Spindle Centers6,100 RPM Spindle SpeedBall Bearing Collet Guide Bushing Block24” X 30” Table AreaAdjustable Fence with (2) StopsDesigned and Manufactured in the USA Additional options:R220T3 – 1.5 H.P. 3-Phase 230/460 Volt
AMXmachinery
SIERRA DOBLE 45 GRADOS - CTD D45X
PARTE # AMX-10052 - SIERRA DOBLE 45 GRADOS - CTD D45XEN MUY BUENAS CONDICIONESMARCA: CTD MACHINES INCMODELO: D45X2 MOTORES: 2 HP, 115/230V, 1 FASE, RPM 34502 SIERRAS DE CORTE PARA MADERA DE 12” DIAMETROHECHA EN USA