Identificador: 291
Abierta
.jpg)
Descripción
PARTE: 2TA-VC-RT07 – BOMBA DE VACIO – 15 HP – ROOTS TYPE
(VC-RT15) Roots Type Vacuum Blowers
Because there is no friction between the moving parts, the Root Blower allows high-speed rotation for offer a combination high flow-rates vacuum, high exhausting efficiency in medium or high vacuum, wide working range, obvious energy-saving results.
High automation, simple operation, easy maintenance, safe, reliable and durable running.
The Root Blower is a displacement-discharge blower as well as a suction type vacuum pump. The unit uses 2 rotors, in the shape of , rotating in opposite directions, for compressing or extracting the air to enhances precision and efficiency
It also minimizes the maintenance cost and prolongs the life span of the blower to a synchronized gear set. While rotating, the rotor-to-rotor and rotor-to-chamber gaps are maintained fractions of millimeters; therefore no lubrication is required, thus delivering non-contaminated air.
TEFC motor
Specification | VC-RT15 | VC-DR07 |
Max. Pressure (in. Hg) | 13 | 25 |
Max. Capacity (CFM) | 459 | 177 |
Speed (RPM) | 3650 | 1420 |
Motor Power | 15 HP | 7.5 HP |
Inlet size | 2" | 2" |
Weight (lbs) | 680 | 350 |
Machine Size | 56" x 29" x 58" | 38" x 23" x 19" |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RETESTADORA
PARTE # 2DO-PAO-CR10 - REDONDEADORA DE ESQUINAS - RETESTADORANUEVA CON GARANTIAESPESOR DEL TABLERO (MÍN. / MÁX.): 10/50 MMVELOCIDAD FRESA: 24000 RPMPOTENCIA MOTOR NEUMÁTICO: 0.37 KWFRESAS DE WIDIA DIÁMETRO MÁX.: Ø 30 mm Z2 R=2 mmTOMA DE ASPIRACION: Ø 100 MMPESO: 100 KGSAIRE COMPRIMIDO SUFICIENTE Y CONSTANTE: 6,5 - (95 PSI) BarDIMENSIONES TOTALES OCUPADAS: 780 x 720 x 1250 MMEMISIÓN SONORA SEGÚN NORMAS ISO 7960 – EN VACÍO EN ENTRADA / SALIDA: 70,6 / 70,4 LA eq [dB(A)]EMISIÓN DEL RUID...
AMXmachinery
SIERRA MULTIPLE - DE VAIVEN - CORTE DELGADO
PARTE: 2OG-ECO - SIERRA MULTIPLE - DE
VAIVEN - CORTE DELGADO - ECO-POWER
NUEVA CON GARANTIAGlue-Ready Slats with
Minimal Saw Kerf Waste The Power Plus Thin
Cutting machine has a sturdy, solid cast iron base and is equipped with a 15kW
(20 HP) main motor. Cuts solid wood blocks into glue able slats with minimal
saw kerf waste.The machine can run
products up to 250mm in height (10”). Provides a high
performance and quality machine for the production of veneer slats. The machine can be...
AMXmachinery
PARTE: 12213 – SIERRA CINTA – CON ALIMENTADOR – SCMI 900-SC
PARTE: 12213 – SIERRA CINTA – CON ALIMENTADOR – SCMI
900-SC
USADA – BUENAS CONDICIONES
220V, 3 FASES, 60 HZ POR CONFIRMAR: VOLANTES 36" DIAMETRO, MOTOR DE 9 HP
AMXmachinery
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
USADO
- MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw
material 150-700 mm- min/max working
thickness 20– 50 mm- min/max working width
35 - 170 mm- min/max final working
length 2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife
set- Volt. 400/50- year 2012- reconditioned by
Weinig Service in 2022
- CE RULES