ID: 1935
Open
Description
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12280 – AFILADORA DE CUCHILLAS – WEINIG RONDAMAT 934
PARTE: 12280 – AFILADORA DE CUCHILLAS
– WEINIG RONDAMAT 934
USADA – BUENAS CONDICIONES
AMXmachinery
LIJADORA DE DISCOS Y CEPILLOS - SLIPCON
PARTE # 11780 - LIJADORA DE DISCOS Y CEPILLOS - SLIPCONEN MUY BUENAS CONDICIONESMODELO: DBB-1350Specifications· Working width: 1350mm· Maximum thickness of work-piece: 100mm· Minimum thickness of work-piece: 1mm· Motor disc-station: 1.5 kW with 50-300rpm· Oscillation: 0.37 kW, 10-40rpm, 100mm· Motor (each sanding roller): 2.2 kW, 14-300rpm (400mm)· Diameter sanding roller: 300/4...
AMXmachinery
SISTEMA FINGER JOINT - AUTOMATICO
PARTE:
2TA-SFJ-6-244-AUTO - SISTEMA FINGER JOINT - AUTOMATICONueva con
garantíaIncluye: Mesa
Entrada Motorizada, Trompo Derecho, Trompo Izquierdo, Transportador y PrensaFeatures:· Produce the
mass finger joint stocks. · The SFJ-620R
performs end trimming and shaping functions on right end of sticks. · The SFJ-620L
performs end trimming, shaping & gluing functions on left end of sticks. · The two trim
saws are fitted with one saw blad...
AMXmachinery
PARTE: 1SA- EB-SPIN - ENCHAPADORA - CANTOS RECTOS Y CURVOS
PARTE: 1SA- EB-SPIN - ENCHAPADORA -
CANTOS RECTOS Y CURVOSPOTENCIA MAXIMA: 3500 WATTSVOLTAJE: 220 VOLTVELOCIDAD DE TRABAJO: VARIABLE 0 – 12 MTS / MINTEMPERATURA DE OPERACIÓN: 150-230 ºCALIMENTADOR: RODILLO DE HULEPROTECCIÓN: BAQUELITAMESA: PLACA 3/16ADHESIVO: HOT MELTPESO APROXIMADO: 180KGBRAZO: ARTICULADOZONAS DE CONTROL DE TEMPERATURA: PIRÓMETROS ANALOGOBASTIDOR: PLACA CA 10TRANSMISION: ENGRANESTERMOSTATO: CONTROL DE ARRANQUETERNOPAR: TIPO JSUJECCION: VACIO POR VENTURYCORTE: ACTIVACION ...