Identificador: 1935
Abierta
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TROMPO COPIADOR 28" MESA ROTATIVA
PARTE # 2TA-CS-0028 - TROMPO COPIADOR 28" - MESA ROTATIVA - AUTOMATICOCaracteristicas: - All operation controls are concentrated in the control box, and the controls are well arranged on the control panel for easier touch up to operation.- Equipped with PC program control for easy maintance and durability usage.- The easy set up at any position, 2 variable speeds table turning makes it possible for the machine to be operated at any cutting speed up to maximum.- The variable cutting feed rate ...
AMXmachinery
SOPORTES
TRANSPORTADORES DE GRAVEDAD SOPORTESPARTE: 1CE-0300 - PEDESTAL TIPO H DE ALTURA VARIABLE - DE 16" A 20"
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - 4D CNC - CAP. 208” X 88” X 5”
PARTE: 2ST-4DCNC - SIERRA
ESCUADRADORA VERTICAL - 4D CNC - CAP. 208” X 88” X 5” TAMANO HASTA 360” X 120”Motor 7.5 HP
NUEVA CON GARANTIASimilar to Control above, plus (except):- Base size 7’ 4” x 17’ 4” cut capacity (9’
10” cut length via CNC control); up to 10’ x 30’ capacity available- Available options include: precision panel
lifters, programmable panel pusher, automatic saw beam positioning,
scoring, EPS.X motorized stop, simple on-screen
o...
AMXmachinery
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
USADO
- MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw
material 150-700 mm- min/max working
thickness 20– 50 mm- min/max working width
35 - 170 mm- min/max final working
length 2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife
set- Volt. 400/50- year 2012- reconditioned by
Weinig Service in 2022
- CE RULES