Identificador: 43
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2SB-FGZ-240-40 - ASTILLADORA PARA MADERA – DOBLE - DUAL - 75 & 60 HP
- MEJOR CALIDAD, PARA USO RUDO INDUSTRIAL CONTINUO
- MOTORES TEFC, 3/60/460/1800 CONECCION DIRECTA
- 2 SCREENS INCLUIDAS
- ROTOR DE USO RUDO Y BALANCEADO
MATERIAL A PROCESAR:
- DESPERDICIO DE CEPILLOS, ASTILLAS, ASERRADEROS, TROCERIA, ETC.
PRODUCTO FINAL:
- PELLETS, BRIQUETTES, COMBUSTIBLE PARA BOILERS, BIODIESEL, ESTABLOS PARA ANIMALES, ETC.
- DISPONIBLE CON UNA VARIEDAD DE TAMANOS DE SCREENS DESDE .020" A 3"
- VARIEDAD DE EXTRACTORES PARA MAXIMIZAR RESULTADOS
OPCIONALES:
- PAQUETE DE SEGURIDAD
- ARRANCADOR SUAVE DE MOTOR
- TRANSPORTADOR/ALIMENTADOR CON VIBRACION CON BASE DE SOPORTE
LA ASTILLADORA DUAL PRODUCE ASERRIN FINO Y EXTRAFINO EN 1 SOLA PASADA.
LA ASTILALDORA DUAL AHORRA ESPACIO Y MOVIMEINTOS
Model |
| Housing | Shaft Diameter | Rotor Width | Rotor Diameter | Bearings | Integral Fan System | Screen Area | Shaft Speed | Tip Speed |
240Z-80 | Upper Unit Lower Unit | 3/4” (20mm) 1/ 2” (12mm) | 3 1/4” (80mm) 3 1/4” (80mm) | 17 1/2” (440mm) 24” (610mm) | 24” (610mm) 24” (610mm) | 2 15/16” (70mm) 2 15/16” (70mm) | N/A 5000 CFM | 442 sq inches (2850 sq cm) 912 sq inches (5880 sq cm) | 3600 RPM 3600 RPM | 22600 22600 |
280Z-90 | Upper Unit Lower Unit | 3/4” (20mm) 3/ 4” (20mm) | 3 1/4” (80mm) 5” (130mm) | 24” (610mm) 36” (900mm) | 24” (610mm) 24” (610mm) | 2 15/16” (70mm) 3 7/16” (90mm) | N/A C/F | 624 sq inches (4140 sq cm) 1368 sq inches (8825 sq cm) | 3600 RPM 3600 RPM | 22600 22600 |
290Z-100 | Upper Unit Lower Unit | 1” (25mm) 1 ” (25mm) | 5” (130mm) 6 3/8” (160mm) | 36” (900mm) 48” (1220mm) | 24” (610mm) 24” (610mm) | 3 7/16” (90mm) 3 7/16” (90mm) | N/A C/F | 936 sq inches (6040 sq cm) 1824 sq inches (11780 sq cm) | 3600 RPM 3600 RPM | 22600 22600 |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GB- MH89-2-50 - CABEZAL PARA MOLDURADORA - 2 NAVAJAS
PARTE: 2GB- MH89-2-50 - CABEZAL PARA MOLDURADORA - 2 NAVAJAS1” DIAMETRO INTERIOR X 89MM (3.5”) DIAMETRO EXTERIOR X 50MM (1.96”) LARGOPara 2 cuchillas corrugadasAngulo de corte 15 gradosNavajas se venden por separadoPrecision CNC machined from high strength hardened alloy steel and designed to operate at speeds up to 9,000 rpm. Exceed the most stringent European OEM standards allowing you to produce smooth material finish with years of trouble-free use.
AMXmachinery
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE
METALES FINOS - BLOAPCO - MODEL 5TOB
Para papel, cartón corrugado y fibras pesadasBEST USES Removal of continuous film, Edge Trim and MatrixINDUSTRIES Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foils CAPABILITIESMaterials:
Paper, corrugated and heavy fiber boardTrim
Width max: 8 1...
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...
AMXmachinery
MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"
PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”,
6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8"
USED - VERY GOOD CONDITIONS
North American
Gladu hydro-lock
6 wing
20 degrees
Interior diameter (bore): 1-13/16”
External diameter: 6” (150 mm)
Lenght 2-1/4” (57 mm)
Lenght 3” (75 mm)
Lenght 4” (102 mm)
Lenght 5” (130 mm)
Lenght 6” (152 mm)