Identificador: 14
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO
7" x 12" Slab Style Opening
Auto Engage Fluid Coupler
Dual Active Rollers
Intellifeed
Kohler Gas Engine
Rotor Disc
Angled Rotor
Ledger Adjustment
Rapid Recovery Auto Reverse
Easy Start Tension Relief
Safety / Control Bar
360° Swivel Exit Chute
Easily Accessible Rotor Hood
Rotor Lockout Safety Lever
Double Banded V-Belts
Highway Tires
Electric Brakes
Torflex Suspension Axles
Signal Lights
Lockable Fuel / Storage Compartment
Enclosed Fuel Caps
DRIVE SYSTEM: | Double Banded Belt with Auto Engage Fluid Coupling | ENGINE: | 999 cc Kohler CH980 Engine |
CHIPPER CAPACITY: | 7" Diameter (Max. 10" Slab) | CHIPPER HOUSING OPENING: | 7" x 12" (Slab Style) |
ROTOR SIZE: | 28" Diameter x 0.75" Thick | NUMBER OF ROTOR KNIVES: | 4 Segmented |
KNIFE TYPE: | Hardened Tool Steel | ROTOR WEIGHT: | 190 lbs |
DIMENSIONS LXWXH: | 160" x 65.5" x 98.65" (Open) | HOPPER OPENING: | 25" x 35" |
DISCHARGE HOOD ROTATION: | 360 degrees | DISCHARGE HOOD HEIGHT: | 98.65" |
ROTOR RPM: | 1375 (Rotor) @ 3600 RPM (Engine) | WEIGHT: | 2750 lbs approx. |
TIRE SIZE: | ST205-75R14 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA DE GABINETES DE 2 VIAS RAMARCH
PARTE # 10297 - PRENSA DE GABINETES - 2 VIAS RAMARCH - PN-28EN BUENAS CONDICIONESMEDIDAS TOTALES: 202" LARGO X 86" ALTO X 23" FONDO16 PISTONES NEUMATICOSPESO APROXIMADO 650 KG
AMXmachinery
PARTE: 1AM-3010 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CMS LARGO
PARTE: 1AM-3010 – MESA DE RODILLOS
– ENTRADA Y SALIDA MAQUINAS – 120 CMS LARGO
MESAS LATERALES
PARA SIERRAS, CEPILLOS, CANTEADORAS,
ETC.
PARA ENTRADA Y SALIDA DE PIEZAS
LARGAS Y/O PESADAS EN MAQUINAS
NUEVA CON GARANTIA
120 CM LARGO X 39 CM ANCHO
ALTURA VARIABLE 83 CM – 87 CM
7 RODILLOS CON BALEROOPCIONAL:
- LARGOS ESPECIALES
AMXmachinery
PARTE: 2EB-MR-S380 - AFILADOR PARA SIERRA CINTA DE 16 a 45 MM
PARTE: 2EB-MR-S380 - AFILADOR PARA SIERRA CINTA DE 16 a 45 MMParameters:Saw blade width: 16-45mmTeeth space: 3-30mmFeed speed: 40-60 teeth/minGrinding wheel: 150mmPower/Speed: 2800 rpmVoltage: 220V/380V, 50HZ/60HZ (Especificar voltage al hacer la orden)Dimension/Weight: 60×50×100cm/102kg
-500x500.jpg)
AMXmachinery
LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHO
PARTE: 3UD-UMD8130 – LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHOCOMPACTA - SUPER HEAVY DUTY MACHINENUEVA CON GARANTIAA. The machine is mainly a variety of plates were thick sanding.B. Mineral cast body with the overall structure, having sufficient rigiditybalance, greatly improving the stability of the machine work.C. Sanding large roll diameter, increasing the service life of the belt, andthe dynamic balance precisely, smooth operation.D. Feeding frequency control, speed range...