Identificador: 1942
Abierta
Descripción
PARTE: 12384 - ARMADORA DE SILLAS - LANCASTER
USADA – BUENAS CONDICIONES
Max opening between jaws (front/back) 32"
Max opening between jaws (side/side) 26"
Max opening between clamping jaws on side clamp assembly 24"
(2) horizontal adjustable swivel side clamps
Pneumatic clamping cylinders with 5" stroke
(1) horizontal adjustable side to side clamp Pneumatic clamping cylinder with 5" stroke
Manual traverse of end clamping jaws Bottom chair leg support table
Foot pedal pneumatic controls
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA DE 54”
PARTE: 11753 - ENGOMADORA DE 54”
3 - ENGOMADORA DE 54”. ENGOMADORA MARCA IND. G.H.
ACCIONADA POR 2 RODILLOS DE 50” DE LARGO Y 7 ½” DE DIAMETRO, CON ELEVADOR
OPERADO CON CONTROL BARS, MOTOR IZQUIERDO CON PERILLA MANUAL Y ELECTRICA,
CONTROL DE MANO DERECHA, ENGOMADO EN MEDIDAS DE 0.8 MM A 2.5 PULGADAS DE GROSOR
CON UNA CAPACIDAD DE PROCESO DE 110 PIES POR MINUTO, MOTOR DE 5 HP Y
MOTORREDUCTOR DE 2.5 HP
AMXmachinery
PARTE: 1SL-DC-SP50-M - PRENSA HIDRAULICA - 50 TON CON MANOMETRO
PARTE: 1SL-DC-SP50-M - PRENSA HIDRAULICA - 50 TON CON MANOMETRONUEVA CON GARANTIA
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALESNueva con garantíaVariable feeding 20" to 80" to get different setup easily.Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.Max. sanding thickness 4".Min. sanding length 13".Sanding spindle 1-1/4" dia. 2 HP.Max sanding wheel 12" dia.SPECIFICATIONS Wheel, Belt Head Brush Wheel Drive Motor2 HPBrush Tilts 90° ~ 180°Sanding Belt3" x 20"Sanding Wheel Dia. Max8"Sanding Spindle D...
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...