Identificador: 90
Abierta
Descripción
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100
Hydraulic 4 Corner Cable Lift
Touch Screen Controls
Laser Height Sensor
NEMA 12 Enclosure
460 Volt Fused Disconnect
5 HP Hydraulic Power Pack
Panel Size: up to 5’x10’
Panel Thickness: 3/8” to 1-1/2”
Lift Capacity: 7000 pounds
Electrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hz
Options:
- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)
- Upgrade for remote hand pendant controls / “go” button
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-SUPERMECA-S - CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAAble to operate by auto return feedingMax Work width x Height : 250 mm (40º) 165 mm (60º)Max work height: 180mmKnife bias angle: 0 - 60 degree (variable)Feed speed: 54m/min (50 hz)Feed motor : 2.2 Kw, 3 phaseHead elevation motor : 0.1 Kw phaseKnife type: Chanching blade typeFront knife size : 335 x 66 x 8mmAccessories:Changing blades, front and rear roller tables and
standard toolsMachine size: (W...
AMXmachinery
ENCHAPADORA
PARTE # 11860 - ENCHAPADORA - CEHISA EP9220V, 3 Ph, 60 Hz, 23.5 AMPALIMENTA AUTOMATICAMENTE LA CINTACORTA AL PRINCIPIO Y AL FINALPERFILA AMBOS LADOS A LO LARGOPULE AMBOS LADOS
AMXmachinery
SIERRA DE BANCO PORTATIL CON LLANTAS - 2 HP
PARTE: 2MK-SC.650 - SIERRA DE BANCO PORTATIL CON LLANTAS – 1500W (2 HP), 110VNueva con garantíaMotor: 110 VMax. Cutting Depth: 90°: 80 mm (3,1″) – 45°: 55 mm (2,2″)Max. Saw Blade Diameter: 254 mm (10″)Table Dimensions: 825 (32,4″) x 500 (19,7″) mmTilting: 45°Extender Table: YesLaser Guide: YesDust Bag: YesPower: 1.500WSpeed: 5.000 RPMWeight : 34 kg (75 pounds)The Portable Table Saw SC.650.I MAKSIWA was designed to work with 254 mm blades (10”) and can cut wood and acrylic (sh...
-500x500.jpg)
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...