ID: 1815
Open
Description
PARTE: 2CK-AF19N
Is designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw table where the feeder is mounted.
- Consistent feeding for bandsaws and resaws
- Pneumatic activation of feeding unit, no foot pedal required
- 10 feed speeds for optimum control
- Line bar roller fence is easily adjusted by rack and pinion handle
- Comes with (2) adjustable steel serrated rollers
- Can be mounted to almost any bandsaw/resaw (recommended for 24” and up)
KEY ADVANTAGES
- Heavy duty construction
- Adjustable feed wheels to accommodate for the height of your material
- Roller fence aids in feeding of material
|
|
INCH |
METRIC |
|
Feed Speeds (10) |
4/8.5/8.5/14/17/25/28/30/50/60 FPM |
1.5/2.5/2.5/4/5/7.5/8/9/15/18 M/min |
|
Roller size |
Φ6-7/8”x 1-9/16″ x 2 pcs / Cast Steel |
Φ175 x 40 mm x 2 pcs |
|
Motor |
1/2 HP (0.375 KW), 3 phase; Forward |
1/2 HP |
|
Maximum roller stroke |
8” |
200mm |
|
Fence dimensions |
16” x 7 7/8” |
400 x 200mm |
|
Max. Roller-Blade Clearance |
8 1/4” |
210mm |
|
Net Weight |
79 Kg |
176 Lbs |
|
Gross Weight |
97 Kg |
209 Lbs |
|
Packing Size |
1220 x 480 x 470mm |
48″ x 18-7/8″ x 18-1/2″ |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
AMXmachinery1
ESCOPLO
PARTE: 2CK-PCM120Power stroke of head permits easy, fast and accurate successive cuts.Separate fan blower to keep work clean and free from dust and chips.Manual adjustable table height and lateral positionHeavy duty cast iron construction.Convenient centralized control panelFoot pedal actuated cycle.Pneumatic workpiece clamping by lever
Chisel range
1/4″~3/4″
Motor
2HP
Spindle speed
3400 RPM
...
AMXmachinery1
COLECTOR DE POLVOS - 7.5HP
COLECTOR DE POLVOS - 7.5HP * 2CK-UFO105BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop..5 HP generating 3673 CFMBase is mounted on casters ...
AMXmachinery1
PARTE: 4NE-5AXISPARS - CENTRO DE MAQUINADO CNC - 5 AXIS - PARS
PARTE: 4NE-5AXISPARS - CENTRO DE MAQUINADO CNC - 5 AXIS - PARSWorking Area: Y:1350MM- X: 2100 MM two different table 1000+1000- Z: 1200 MM• Control Unit: TPA control unit• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Tool Changer: Magazine for 5 pieces• Reductor: Liming FE Series• Spindle Motor: HITECO TILT-J Bi-rotary 2 Axis head• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubricatio...