Identificador: 1560
Abierta
Descripción
PARTE: 2SG-AF06 - ALIMENTADOR PARA SIERRA CINTA - 1/8 HP 220V, 1 FASE
Nuevo con garantía
Para sierras cintas hasta de 24”
Ideal for light to medium duty use on a bandsaw and is spring-loaded, ensuring smooth and accurate cuts.
A much better alternative to using standard 3 and 4 wheel machines.
Equipped with two 8 x 1" Polyurethane Rollers and can be adjusted in and out depending on the size of your bandsaw table.
Features
Variable Speed - 0-40Ft/min
1/8 HP Motor 220V, 1 fase
Max Height of Rollers: 3-3/8"
Polyurethane Coated Rollers 200mm X 25mm x 2 Rollers
Distance from center of rollers to mounting position on corner of table (Adjustable): 14.5 to 18.5 inches (Space required from corner of table to tip of blade) - May need to add extension if too small
2 Year Warranty
Variable Speed
Speed settings can easily be adjusted depending on your requirements. With speed settings ranging from 0-40FPM, the AF06 provides convenience and consistency for your stock feeding.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA MULTIPLE - INVICTA DELTA
PARTE:
11917 – SIERRA MULTIPLE - INVICTA DELTA
USADA – BUENAS CONDICIONES
Motor 220/380V
AMXmachinery
LIJADORA DE TAMBOR 50"
PARTE # 2SM-750102 - LIJADORA DE 2 TAMBORES - 50" DE ANCHO – 7.5 HP, 220V, 1 FASEPARTE # 2SM-750302 - LIJADORA DE 2 TAMBORES - 50" DE ANCHO – 7.5 HP, 220V, 3 FASES SPECIFICATIONSSanding Capacity:Maximum Width (in): 25, 37, 50Minimum Length (in): 3-1/2Maximum Thickness (in): 25″ model: 637″ & 50″ models: 12Minimum Thickness (in): 1/32Dimensions HxWxD (in):25″ model: 43 x 46 x 3137″ model: 43 x 58 x 3150″ model: 50 x 71 x 31Drum (in): (extruded aluminum)25″ model: 5 x 2537″ ...
AMXmachinery
RESISTENCIA FILAMENTO POSTFORMADORA
PARTE: 2EV-0110.10.00 - FILAMENTO POSTOFORMADORA 0110 – PARTE 80Tamaño paquete 166” x 6” x 6”
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.