Identificador: 1323
Abierta
Descripción
PARTE: 2EX-XF-19R – ALIMENTADOR AUTOMATICO – PARA REASERRADORA - 1/2 HP
Nuevo con garantía
PRESION CON RESORTES
PARA SIERRAS CINTAS DE 24” O MAS GRANDES
1/2 HP – 208-240V – 1 FASE
1/2 HP – 208-240V - 3 FASES
10 VELOCIDADES CAMBIANDO COMBINACION ENGRANES
VELOCIDAD MIN: 5 PIES/MIN
VELOCIDAD MAX: 60 PIES/MIN
2 RUEDAS DE 6-7/8” X 1-9/16”
GUARDA DE RODILLOS 15-3/4” X 7-7/8”
BRAZO GIRA 30 GRADOS
ANCHO MAXIMO 8-1/4”
PESO 95 KG
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA INGLETEADORA – DOBLE – CTD
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...
AMXmachinery
PARTE: 12485 - DOBLADORA DE TUBO - SB-210046
PARTE: 12485 - DOBLADORA DE TUBO - SB-210046
USADO BUENAS CONDICIONES
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...