Identificador: 4
Abierta
Descripción
PARTE: 2EB-SF-U3R8 - AFILADOR DE BROCAS Y CORTADORES RECTOS UNIVERSAL
Maquina ara afilado para diferentes tipos de cortadores, brocas, para metal, madera, etc
Videos de la maquina: Video 1
Características:
1. Concise and easy, and grind out in a straight line.
2. Strength increase, increase the service life of blade and processing capacity.
3. High grinding accuracy, easy to install, aesthetically pleasing, novel structure, flexible the rotating parts, low noise, small vibration, tool post part bearing, durable, wear-resisting,
4. All kinds of diameters, shapes, Angles of the carving knife according to the proportion of engraving corresponding grinding.
PARAMETERS:
5 types R8 Collects | 0.15''=4mm, 0.2''=6mm, 0.3''=8mm, 0.4''=10mm, 0.5''=12mm. |
Grinding Dia. | ф0-100mm(0-3.94") |
Motor | 110V, 60 HZ, 1/3 HP, 2,800 RPM |
Taper Angle | 0°-180° |
Relief Angle | 0°-45° |
Negative Angle | 0°-26° |
Grinding Spindle | 5200r.p.m. |
Cup grinding wheel | 100x50x20mm(3.9*2.0*0.8") |
Net Weight | 99LB (45kg) |
Packing dim. | 55x65x47cm (21.7*25.6*18.5") |
Manufacturer/seller reserves the right to change any specifications without notice.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
PARTE: 2TA-SET-TRANS –
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
Nueva
con garantíaDiseñada
a la medida para transferir material continuamente entre 2 espigadoras dobles
de cadenaTableros,
puertas, etc.
Aumenta
la eficiencia y disminuye o elimina los manejos manuales
Video: https://vimeo.com/639803360
AMXmachinery
PARTE: 12443 - MOLDURADORA - 5 CABEZALES - WEINIG PROFIMAT 23
PARTE:
12443 - MOLDURADORA - 5 CABEZALES - WEINIG PROFIMAT 23
USADA - BUENAS
CONDICIONES
MOTORES 230V, 3 FASES
AMXmachinery
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
PARTE:
12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS
CONDICIONESManufactured in 2015• 50.5 Total HP• Spring loaded conveyor pin system• Spiral insert knife cutterheads withtwo sided solid carbide knives• Digital electronic thicknessadjustment• 25” Wide x 8” thick capacity• Inverter variable feed speeds• Sectional chip breaker and feed rollerbefore top head• Removeable bottom head for knife change• Chain feed drive• Auto conveyor lubrication• New ...
AMXmachinery
MOLINO PULVERIZADOR - PULVEX 300
PARTE: 12307 - MOLINO PULVERIZADOR - PULVEX 300
USADA - BUENAS CONDICIONES
MOTOR ACTUAL 12.5 HP, 220V, 2 FASES
SE PUEDE COTIZAR MOTOR 10 A 15 HP 220/440V, 3 FASES