CIERRA CINTA 37" 2 EN 1     PARTE:2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job.  What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size.  The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease.  With a large cutting height capacity under the guide of up to 22” it can also b...

CIERRA CINTA 24" 2 EN 1    PARTE: 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job.  What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size.  The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease.  This bandsaw delivers high accuracy for maximum production along with a simple design that assure...

CIERRA CINTA 24"      PARTE: 2CK-HB600RIncorporates a robust design with economical price point.  With its industrial cast iron wheels and table assembly it can handle any job.  With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements.  The upper and lower blade guides provide maximum stability no matter the blade you are cutting with.  This bandsaw delivers high accuracy for maximum production along with a simple desig...

CIERRA CINTA 20"    2CK-HB500RIncorporates a robust design with economical price point.  With its industrial cast iron wheels and table assembly it can handle any job.  With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements.  The upper and lower blade guides provide maximum stability no matter the blade you are cutting with.  This bandsaw delivers high accuracy for maximum production along with a simple design that ass...

PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFMNUEVO CON GARANTIABlower HP: 15HP Direct DriveShaker HP: 1/2HP3 phase, 460V26-3/8" 8-Blade ImpellerMachine CFM Rating: 5000Inlet Dust Port Size: 16" RoundOutlet Dust Port Size: 12"x15"Filters: Seventy-Two 5"x60 Clothe BagsBottom Bags: 22"x48"

PARTE:  3YC-YOM-120-A – SET FLECHA - ESCOPLO OSCILANTE - 2 MESASNuevo con garantíaFlechaBalerosBase hierro forjado

PARTE: 2CK-P24HV - CEPILLO - 1 CARA - CAPACIDAD 24” ANCHO – 7.5 HP - CABEZAL ESPIRAL Nuevo con garantía230/1/60 electrics - 1 Fase 230/3/60 electrics) - 3 Fases DESCRIPTION SPECIFICATION Maximum planing width 24″ Maximum planing thickness 8″ Feed speeds (2) 20 & 30 FPM Main motor 7.5 HP Cutterhead diameter 3-3...

PARTE: 1AM-0010 - DESARMADORA DE TARIMAS - USO RUDO - INDUSTRIALNueva con garantía – 6 meses sobre defectos de fabricación en partes mecánicasMotor 10 HP, 220/440V, 3 fases, conectado a 220VEstación de paro y arranqueSierra cinta 251” largo x 1-1/4” ancho - de importación de la mejor calidadMedida mesa: 60” ancho x 48” fondo Medida máxima de tarima: 60” ancho x cualquier largoPoleas, Llantas, Sierra Cinta y Bandas - Tapadas y Cubiertas para Segu...

PARTE: 1AM-0010-G - DESARMADORA DE TARIMAS - USO RUDO - INDUSTRIAL - MOTOR GASOLINANueva con garantía – 6 meses sobre defectos de fabricación en partes mecánicasMotor Gasolina 13 HPEstación de paro y arranqueSierra cinta 228” largo x 1-1/4” ancho - de importación de la mejor calidadMedida mesa: 60” ancho x 48” fondo Medida máxima de tarima: 60” ancho x cualquier largoPoleas, Llantas, Sierra Cinta y Bandas - Tapadas y Cubiertas para Seguridad de l...

PARTE: 1AM-1180-G – RESACADORA PARA TARIMAS – 40 CUCHILLAS INSERTOS – RESAQUE 9” LARGO - USO RUDO – INDUSTRIAL – MOTOR GASOLINANueva con garantía – 6 meses sobre defectos de fabricación en partes mecánicasMotor Gasolina 13 HP Resaque máximo 9” largo x 3” alto x 3” profundidad400 a 800 cortes/hr aprox.Cabezal con 40 cuchillas intercambiablesCabezal y Cuchillas de Importación – La más Alta Calidad Construcción Uso Rudo IndustrialVideo - htt...

PARTE: 2CK-MX370PW – ENCHAPADORA DE CANTOS AUTOMATICA NUEVO CON GARANTIAFrom cabinet parts to cabinet doors, this edgebander can do it all.The MX370PW Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tap...

PARTE: 2CK-MX340 – ENCHAPADORA DE CANTOS AUTOMATICA NUEVO CON GARANTIAHigh-quality edge banding results for cabinet parts and case goods.The MX340 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  It comes equipped with high-frequency motors on both the end trim and top & bottom trim.  In addition, it is equipped with PVC radius scraping and buffing units.  Its compact design and affordable price point make it th...

PARTE: 2CK-MX340M – ENCHAPADORA DE CANTOS AUTOMATICANUEVA CON GARANTIACompact design with best-in-class edgebanding result.The MX340M is an entry-level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX340M can output high-quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient chang...

PARTE: 2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS NUEVA CON GARANTIAWith 2′ digital readout control panelHydraulic blade tensionSaw wheel elevation is driven by motorConveyor is driven by hydraulic motorVideo: https://vimeo.com/668680300 Max. board/cant size 11.8″ (W) x 9.8″ (T) (300 x 250mm) Distance from upper blade to conveyor table .79″ – 6.7″ (20 – 170mm) Distance from lower ...

PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3 CARASEliminate hand sanding with our economical sanding and de-nibbing solution for linear profileDesigned to help with your everyday linear profile sanding needs. It can be used for white wood sanding and sealer sanding of linear parts such as mouldings, flooring, furniture components, window parts etc. The machine works well as a standalone unit, or as part of the finishing line.Designed for sanding linear profiled wood on three sidesBrushing h...

PARTE: 2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESORNUEVA CON GARANTIA 2 OPCIONES: 230/1/60 - 460/3/60Can produce a cut up to 11.8” wide and 4.92” thick.  Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material.  The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. The user-friendly controls and operation make will all...

PARTE: 2CK-M412 - CEPILLO 4 CARAS – 5 MOTORES - 13” ANCHOEconomical and compact machine designed for professional woodworkers looking to produce a wide range of mouldings or S4S.  With individual motors to each spindle you can comfortably produce a wide range of products including flooring, crown moulding, paneling, door & furniture components, S4S, and more.  The electronic digital thickness control and mechanical readouts allow for fast and accurate adjustment of the spindles to produce ...

PARTE: 2CA-RM150 - BASTONERA - CAPACIDAD 1” - 5” DIAMETRO NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board...

FRESADORA Y TALADRO CNC DE AVANCE CONTINUO• Hopper with integrated separation for items with delicate or painted surfaces• Careful belt transport of items through the machineExtra• Waste Conveyer• Return conveyor with integrated brush cleaning unitWorkstation 1:Vertical and horizontal independent spindle drilling heads (customer specific)Workstation 2:Horizontal drilling groups left and rightWorkstation 3:Vertical and horizontal independent spindle drilling heads, groove blade and millin...